Adaptation Function Initiation

Service Reminder Indicator (SRI), Adapting Interval Values

Adapt Service Reminder Indicator (SRI) as follows during pre-delivery inspection:
- The interval values (distance) must be adjusted (adapted) to the applicable intervals of 12,000 km (7,500 mi) or 24,000 km (15,000 mi).
- The adjustment is carried out in adaptation channels 5 and 6.
Channel 05 (Oil Change Service Interval Value - Distance In KM)
Channel 06 (Inspection Service Interval Value - Distance In KM)

Note:
- The adaptation must be made in kilometers, even in countries where speedometers record distance in miles.
To do this, convert the adaptation value from miles to kilometers.
- Conversion of miles to kilometers: miles x 1.609 = km.
- Kilometers are displayed in "Read Measuring Value Block" function 08, display groups 002 and 050.
- The specified values can only be input in increments of 1,000 km.
Therefore, the display would indicate 1,000km by a "1" in the display.
- If an incorrect value is input, "Adaptation" function 10 is ended and must be initiated again.

- Connect VAG 1551 or 1552 Scan Tool (ST)
- Switch ignition ON.

V.A.G. On Board Diagnostic Help
1 - Rapid data transfer 1)
2 - Blink code output 1)

Indicated on display
1) Operating modes 1 and 2 appear alternately

- Press button -1- to select "Rapid data transfer" operating mode


Rapid data transfer Help
Input address word XX

Indicated on display

- Press buttons -1- and -7- to insert "Instrument Cluster" address word 17 and press -Q- button to confirm input.


4B0919930B C5-KOMBIINSTR UN4 D13 ->
Coding 07062 WSC 12345

Indicated on display (example)

- Press -> button.