General Information

On Board Diagnostic (OBD), technical data





On Board Diagnostic (OBD), function











By selecting address word 33, the following modes can be selected:

Note: This On Board Diagnostic function information does not go into detail. Find additional information in applicable training literature.

Safety precautions
If it is necessary to use test equipment during road test, observe the following:

CAUTION:
^ Always secure test or measuring equipment on the rear seat A second technician using a safety belt is needed to operate the equipment from there.
^ If the test or measuring equipment were operated from the passenger's seat, the passenger air bag could be deployed in an accident and possibly injure a person sitting there.

To prevent injury to persons or damage to electrical or electronic components, observe the following:
^ Connect or disconnect test and measuring equipment only when the ignition is switched off.
^ During some testing it can happen that the control module recognizes and stores a malfunction or Diagnostic Trouble Code (DTC). It is therefore necessary after testing and repairs to check the DTC memory and erase the DTC memory if necessary.
^ Always switch the ignition off before disconnecting the battery, otherwise the Transmission Control Module (TCM) could be damaged.