With Manufacturer Scan Tool

Erasing DTC Memory (Function 05).

NOTE: If DTC memory cannot be erased, check DTC memory again and repair malfunctions.

Requirements

- DTC memory checked
- All malfunctions repaired

After successfully checking DTC memory:

Carrying out "Erase DTC Memory" function 05

Indicated on display

Rapid data transfer HELP
Select function XX

- Press buttons -0- and -5- to select "Erase DTC Memory" function 05.

Indicated on display

Rapid data transfer Q
05 - Erase DTC Memory

- Press -Q- button to confirm input.

Indicated on display

Rapid data transfer ->
DTC Memory is erased!

DTC memory is now erased.
- Press -> button.

Indicated on display

Rapid data transfer HELP
Select function XX

NOTES:
- This message indicates an error in the test sequence.

Attention!
DTC memory was not interrogated

- This message indicates an error in the test sequence.

Rapid data transfer ->
DTC memory was not interrogated

- Adhere exactly to the test sequence: first check DTC memory, and if necessary, repair malfunctions, then erase DTC memory