Securing Spring For Lock Cable

REMOVING AND INSTALLING SECURING SPRING FOR LOCK CABLE
Removing and installing ignition lock cable, refer to Shift Interlock Cable.

Removing





- To remove lock cable, lift spring slightly at top (arrow -B-).
- Disengage spring (arrow -A-) from retainer lug (arrow -C-) and lift out.

Installing
- Insert spring from above (arrow -B-) and engage under retainer lug (arrow -C-).
- Align spring so that it lies level in groove (arrow -A-).
- To install lock cable, lift spring slightly at top (arrow -B-).