Backrest Hinge Trim

Backrest Hinge Trim, Removing And Installing







1 - Mounting trim
Removing
- Remove seat.
- Remove mounting trim -1- downward, so that pins -4- and tabs -5- are pulled out of catches -6- and -7-.
- Pull out mounting trim -1-.
Installing
- On same side of side airbag module, insert insertion edge -2- under side airbag module in direction of arrow.
- Press mounting trim -1- on in a straight line, so that pins -4- and tabs -5- engage in catches - 6- and -7-.
2 - Insertion edge
- Only on same side of side airbag module.
3 - Backrest
4 - Pin
5 - Clip
6 - Pin catch
7 - Tab catches