Left Front Level Control System Sensor -G78-, Remove/Install

Left Front Level Control System Sensor -G78-, Removing and Installing


Removing







The front level control sensor -1- is secured with a retainer -2- to the left lower track control link -3- of the front axle.
- Disconnect electrical connector.
- Remove level control sensor from bracket -6- by removing nut -5- and both Allen screws -4- (3 mm).







- By slightly depressing tabs (arrow) open wire retainer -1- at left lower track control link.
- Remove level control sensor linkage -2-.

Installing
- Install in reverse order of removal.