Operation CHARM: Car repair manuals for everyone.

Airbag - Warning Labels



Number:
00-01

Group:
OO

Date:
Jan. 21, 2000

Subject:
Airbag WARNING! Labels, Compliance with Federal Motor Vehicle Safety Standard 208

Model(s):
All USA 2000

Service:
Federal Motor Vehicle Safety Standard 208 requires permanent air bag warning labels on the vehicle sun visors, and a label on the dashboard in a position visible from all front seating positions.

The label on the dashboard does not have to be permanent, but must remain attached when the vehicle is delivered to the customer.

To comply with this requirement, all Audi models are equipped with a triangular label, attached with removable adhesive to the center of the windshield and touching the top of the dash.

Fines may be assessed at the time of delivery by the Federal government if the required label is not present at the time of vehicle delivery to the customer.




Label Location:
A label is located on each sun visor (sun visor flipped up) as shown.

Note:
Labels on sun visors may not be removed. If sun visor labels are damaged, the appropriate label for the applicable model must be ordered through your Parts Department.

Illustration is only a sample. Actual label size or shape as well as location may differ by model and production period.





Labels are located on each sun visor (sun visor flipped down) as shown.

Note:
Labels on sun visors may not be removed. If sun visor labels are damaged, the appropriate label for the applicable model must be ordered through your Parts Department.

Illustration is only a sample. Actual label size or shape as well as location may differ by model and production period.





WARNING! label, when installed, must be attached inside at the center of windshield. The bottom edge of the label must touch the top of the dashboard such that the label itself is not curled or bent.

Note:
This label must remain attached to the windshield at all times until after the car's actual delivery to a customer; including during showroom display ONLY THE CUSTOMER MAY REMOVE IT!

Additional quantities of this label to replace any that might be damaged or missing may be ordered using Part No: 1J0 010 239D.