VAS 5094 Airbag Adapter, Connecting

- Insert harness connector -2- (VAS5094 airbag adapter) in connector housing -3-.
- Connect igniter wire -6- of airbag module to harness connector -1- (airbag adapter).
- For seats with seat heaters, disconnect harness connector
- Turn down carpet in area near guide rail.
- Push seat back out of guide rail.
- Lift seat out of vehicle.


WARNING!
Leave VAS5094 airbag adapter on seat until seat is again installed in vehicle.


1 - Airbag adapter-igniter wire harness connector
2 - Airbag adapter - Ground wire harness connector Audi A6 1998 ->, Audi A4 1995 and Audi A3 1997 ->
3 - Ground wire harness connector from airbag module
4 - Airbag adapter - Ground wire harness connector (Golf 1991 ->)
5 - Airbag adapter - Ground wire harness connector (Passat 1997 ->)
6 - Airbag module igniter wire harness connector