Adaptation (Scan Tool Function 10)
Adaptation (Scan Tool Function 10)
Individual functions are called up by entering the appropriate adaptation channel numbers (listed in the adaptation table).
NOTE:
- Using measuring value blocks 10, 11, 12 and 15, the values that need to be transferred to the new instrument cluster can be read out before replacement.
- Adaptation channels 42, 43, and 44 (See measuring value blocks 013 and 014) must be adapted according to the oil quality (measuring value block 15).
- Adaptation channels 60, 61, and 62 are only needed when the instrument cluster communicates with the corresponding BUS system..
- Measuring value blocks 125 and 126 indicate the components that are part of the powertrain data-BUS.
- Measuring value block 130 indicates the components that are part of the comfort system data-BUS.
- Measuring value block 140 indicates the components that are part of the information data-BUS.
Adaptation table :
Adaptation channel Adaptation function
02 Resetting SRI after service
03 Adaptation of fuel gauge
04 Language version of driver information display
09 Odometer
18 Adaptation of auxiliary heater
30 Adaptation of fuel gauge sender resistance range
35 Adaptation of engine speed threshold
40 Adaptation for distance driven since service
41 Adaptation for time since service
42 Adaptation for minimum mileage performance
43 Adaptation for maximum mileage performance
44 Adaptation for maximum time interval
45 Adaptation for oil quality
46 Adaptation for total consumption quantity (only gasoline engines)
60 Adaptation powertrain data-BUS
61 Adaptation comfort system data-BUS
62 Adaptation information data-BUS
Initiating "Adaptation" function 10
Indicated on display
Rapid data transfer HELP
Select function XX
- Press buttons -1- and -0-. This selects "Adaptation", function 10.
- Press -Q- button to confirm input.
Indicated on display
Rapid data transfer Q
10-Adaptation
- Press -Q- button to confirm input.
Indicated on display:
Adaptation
Input channel number XX
- Enter desired adaptation channel (adaptation table).
- Press -Q- button to confirm input.
NOTE: After changing an adaptation value or ending an adaptation channel, "Adaptation" function 10 must be performed again before selecting another adaptation channel.
Language version of driver information display
Indicated on display
Rapid data transfer HELP
Select function XX
- Press -1- and -0- and confirm by pressing the -Q- button.
Indicated on display
Rapid data transfer Q
10-Adaptation
- Press -Q- button to confirm input.
Indicated on display:
Adaptation
Input Channel number XX
- Press buttons -0- and -4-.
- Press -Q- button to confirm input.
Indicated on display:
Channel 4 Adaptation 1 ->
Language < -13- >
NOTE:
- Display indicates only the last digit of the five digit language version code, for example, 1 for German.
- If incorrect value is input "Adaptation" function is terminated and Adaptation If function 10 must be initiated again.
- Code can now be entered using the scan tool keypad in steps or via direct input.
Coding table:
Code Language version
0001 German
0002 English
0003 French
0004 Italian
0005 Spanish
0006 Portugese
Input in steps:
- Code can be decreased using button 1 and increased using button 3, for example, to 2 for language version English.
Indicated on display:
Channel 4 Adaptation 2 Q
Language < -1 3- >
- Press -Q- button to confirm input.
Indicated on display:
Channel 4 Adaptation 2 Q
Store changed value?
- Press -Q- button to confirm input.
Indicated on display:
Channel 4 Adaptation 2 ->
Changed value is stored
- Conclude adaptation of language version by pressing the -> button.
Direct input:
Indicated on display:
Channel 4 Adaptation 1 ->
Language < -13- >
- Press -> button.
Indicated on display:
Channel 4 Adaptation 1
Input Adaptation value XXXXX
- Input desired five digit code, Enter using keypad.
Example:
Coding: 2 (English)
Input value: 00002
- Press -Q- button to confirm input.
Indicated on display:
Channel 4 Adaptation 1 Q
Input Adaptation value 00002
- Press -Q- button to confirm input.
Indicated on display:
Channel 4 Adaptation 2 Q
Language <-1 3->
- Press -Q- button to confirm input.
Indicated on display:
Channel 4 Adaptation 2 Q
Store changed value?
- Press -Q- button to confirm input.
Indicated on display:
Channel 4 Adaptation 2 ->
Changed value is stored
- Conclude adaptation of language version by pressing the -> button.