Section H - Setting Basic Settings For Vehicles With Automatic Headlight Levelers
Section H - Setting Basic Settings For Vehicles With Automatic Headlight Levelers
- The basic settings can be performed on the wheel alignment platform after front end alignment with vehicle on its wheels
- Settle car (push down on car a few times so that shock absorbers and car move up and down)
- With ignition switched off, connect VAG 1551 or VAS 5051
- Switch ignition switch to "ON" position
- Indicated on display
Rapid data transfer Help
Insert address word XX
- Push buttons -5- twice for "Headlight automatic headlight range control"
- Push Q to confirm input
- Indicated on display (example)
4B0907357 LEUCHTWEITEREGLER D003->
Coding 00010 WSC01236
- Push -> button
- Indicated on display
Rapid data transfer Help
Select Function XX
- Press buttons -0- and -4- to select "Basic Setting" function
- Indicated on display
Rapid Data Transfer Help 04 -
Basic Setting
- Press -Q- button to confirm input
- Indicated on display
Basic Setting Input
display group number XXX
- Press buttons -0-, -0- and -1- to input display group number 001
- Press -Q- button to confirm input
- Indicated on display
Basic Setting 1->
Please Wait
- Headlights are moved into adjustment position (about 15 seconds)
- Indicated on display
System in Basic Setting 1->
Set headlights
Headlights are now in adjustment position
- Adjust headlights using a headlight adjustment tool (e.g. VAS 5046)
Basic setting 1 turns regulation off and "Headlights not adjusted" will be stored in DTC memory
- Press -> button
- Indicated on display
Rapid data transfer Help
Select function XX
- Press buttons -0- and -4- to select "Basic Setting" function 04
- Indicated on display
Rapid data transfer Q 04
- Basic setting
- Press -Q- button to confirm input
- Indicated on display
Basic Setting Input
display group number XXX
- Press buttons -0-, -0- and -2- to input display group number 002
- Press -Q- button to confirm input
- Indicated on display
System in Basic Setting 2 ->
ctrl. pos. learned
The control module has stored this position as the normal position. "Headlights not adjusted" is erased from DTC memory and regulation is switched back on
- Press -> button
- Indicated on display
Rapid data transfer Help
Select function XX
- If vehicle has ESP, go to Section J, otherwise proceed to next step
- Press buttons -0- and -6- to select the function "End output"
- Press -Q- button to confirm input
- Turn ignition switch to "OFF" position
- Recall work is complete
- Destroy and discard all removed parts