Transmission Housing and Shift Mechanism

Transmission housing and shift mechanism, removing and installing






1. Cone head bolt, 25 Nm
2. Drive flange with pressure spring
3. Reverse light switch, 20 Nm
4. Sealing washer
^ Always replace
5. Oil drain plug, 30 Nm
6. Sealing washer
^ Always replace
7. Cover
8. Hex head bolt, 20 Nm
^ For selector shaft item - 14 to cover
9. Hex head bolt, 25 Nm
10. O-ring
^ Always replace
^ Inset into groove of cover
11. Securing bolt
^ For shift gate of selector shaft
^ Insert with locking fluid D 000 600 A2
12. Hex head bolt, 25 Nm - additional 45°
^ With captive washer
13. Hex head bolt, 25 Nm - additional 45°
^ Without washer
14. Selector shaft
15. Hex head bolt, 20 Nm
16. Shift cover
17. Clutch housing
18. Transmission housing