Transmission Vehicle Speed Sensor (VSS) -G38-

5 Speed A/T 01V

Transmission Vehicle Speed Sensor (VSS) -G38-, removing and installing

Removing
- Removing oil pan





- Disconnect harness connector from Transmission Vehicle Speed Sensor (VSS) -G38- (arrow).





- Remove Transmission Vehicle Speed Sensor (VSS) -2-.

Installing
- Install and tighten Transmission Vehicle Speed Sensor (VSS) -2- using spacer sleeve -1- (height: 8 mm) to 6 Nm.





- Connect connector at Transmission Vehicle Speed Sensor (VSS) -G38-.
- Installing oil pan
- Fill up ATF