Clutch Switch: Service and Repair

Clutch Pedal Position (CPP) switch -F1 94-, removing and installing

Note: The clutch pedal position switch -F194- allows the engine to be started only with the clutch pedal depressed. Introduction 05.97

1. Mounting bracket
2. Cable bracket
3. Locking clip
4. Pin and locking plate
- Latched in clutch pedal
5. Clutch pedal
- Removing and installing, Clutch Pedal and Over-Center Spring, Removing and Installing
6. Clip
7. Bracket for harness connector
8. Clutch Pedal Position (CPP) switch -F194
- Adjusting, Adjustments
9. Clip
10. Screw and washer assembly
- 8 Nm (71 inch lbs.)
11. Mounting plate