B-Pillar Outer Trim, Removing And Installing

1 - Outer trim of B-pillar
Removing:
- To remove, unclip concealment cover -6- and remove screws -3- and -7-.
Installing:
- Installation is reverse of removal procedure
- Distance between B-pillar trim and roof molding, dimension -a- = 0.5 mm; dimension b = 2 mm
- B-pillar trim must be flush with door component carrier seal -8-
2 - Expanding nut (2x)
3 - Screw (2x)
- 1.5 Nm (13 in. lb)
4 - Expanding nut (2x)
5 - Plastic clip
6 - Concealment cover
7 - Screw (2x)
- 1.5 Nm (13 in. lb)
8 - Door component carrier seal