Removal and Replacement

Central Locking System Pump, Removing And Installing

The pump for the central locking system is located in the right-rear of the luggage compartment under the luggage compartment trim.







- Fold back luggage compartment trim and remove insulation - 3 - with pump for central locking system - 1 -.
- Disengage connecting line - 2 -.







- Open insulation, disengage electrical harness connectors and remove connector - 2 - for vacuum line.

CAUTION: After disconnecting all three connectors from the central locking system pump, ensure that the middle 6-pin connector (for power supply) is always plugged in last.