Differential, Removing and Installing

Differential, removing and installing

Note: Removing and installing is also possible with transmission installed in vehicle.

1. Bolt, 10 Nm 1/4 turn (90°) further
2. Drive flange
^ When removing, secure with a drift to prevent it turning
3. Bolt, 25 Nm
^ Qty. 10
4. Cover for final drive
^ Removing and installing drive wheel for speedometer sender -G22 , Refer to Powertrain Management
^ If replaced: adjust ring gear, Refer to Differential, Assembly, Adjustments
5. Oil filler plug, 40 Nm
^ Checking oil level in transmission
6. Differential
^ Disassembling and assembling, Refer to Differential, Assembly, Service and Repair
^ If replaced: adjust ring gear, Refer to Differential, Assembly, Adjustment
7. Transmission housing
^ Servicing, Refer to Transmission Disassembling and Assembling, Refer to Transmission housing, Servicing