Side Seat Trim, Removing and Installing

Side Seat Trim, Removing And Installing







WARNING: Before starting work on seats, connect VAS 5094 airbag adapter.

1 - Backrest
2 - Side seat trim, tunnel side

NOTE: It is not necessary to disconnect any wiring when removing side seat trim on tunnel side. Remainder of removal procedure is identical to removal of side seat trim on door sill side.

3 - Bracket for side seat trim, tunnel side
4 - Seat frame
5 - Bolts (4x per trim piece)
6 - Bracket for side seat trim, door sill side







7 - Side seat trim, door sill side
Removing:
- Move seat fully down.
- Remove seat.
- Remove mounting trim.
- Remove seat cushion.
- Rotate belt buckle downward.
- Disconnect all harness connectors that run from circuit board to side seat trim on door sill side.
- Cut all tie wraps on wiring harness using diagonal cutter.
- Unbolt bolts - 5 - (4x) on side seat trim.
Installing:
- Attach trim on lower mounting of backrest frame.
- Secure side seat trim with bolts - 4 - (4x).