Left and Right-Side Trunk Trim, Removing and Installing

Left And Right-side Trunk Trim, Removing And Installing

Foldable rear backrest

- Remove side cover.
Split-foldable rear seat, removing and installing.
- Remove on-board tool kit and jack.







- Remove cover - 1 - for latch bracket and remove trim - 2 -.
- Remove plastic clips - 5 - (2x) at tail light.
- Remove screws - 3 - for loading edge cover - 4 -.
Tightening torque: 1.5 Nm (13 in.lb)
- Unclip clip - 6 - at left side reinforcement.
- Raise loading edge trim - 4 - slightly and pull out trim - 2 -.
- Tilt trim toward center of vehicle and remove.