Mounting Trim, Removing and Installing

Mounting Trim, Removing And Installing







WARNING: Before starting work on seats, connect VAS 5094 airbag adapter.

1 - Mounting trim
Removing:
- Remove seat.
- Remove mounting trim - 1 - downward, so pins - 4 - and tabs - 5 - are pulled out of catches - 6 - and - 7 -.
- Pull out mounting trim - 1 -.
Installing:
- On same side of side airbag unit, insert insertion edge - 2 - under side airbag module in direction of arrow.
- Install mounting trim evenly so pins - 4 - and tabs - 5 - engage in catches - 6 - and - 7 -.
2 - Insertion edge
- Only on same side of side airbag module
3 - Backrest







4 - Pins
5 - Clip
6 - Pin catch
7 - Tab catches