Oil Pump: Service and Repair
Oil pump, removing and installing
Removing
- Remove oil pan and baffle plate. Refer to Oil Pan, Engine - Service and Repair - Procedures Service and Repair
- Remove bolt -2-.
- Remove sprocket wheel from oil pump shaft.
- Remove bolts -1- and -3- and remove oil pump.
Installing
Installation is carried out in the reverse order of removal; note the following:
- Insert dowel sleeves -Item 12-.
Oil pump shaft/sprocket wheel location: Can only be installed in one position.
- Installing oil pan. Refer to Oil Pan, Engine - Service and Repair - Procedures Service and Repair
Tightening torques