With Manufacturer's Scan Tool
Check DTC Memory (Scan Tool Function 02)
NOTE: The displayed malfunction information is not constantly updated. It is updated when On board Diagnostic (OBD) is initiated or with "Erase DTC memory" function 05.
- Switch printer on by pressing PRINT button (indicator light in button comes on).
Indicated on display
Rapid data transfer HELP
Select function XX
- Press buttons -0- and -2- to select "Check DTC Memory" function 02.
Indicated on display
Rapid data transfer Q
02-Check DTC Memory
- Press -Q- button to confirm input.
The number of DTCs stored will appear on the display.
X DTC recognized ->
Stored DTCs are displayed in sequence and printed out one after the other.
- Compare printed trouble codes to Diagnostic Trouble Code (DTC) table and repair malfunction. Automatic Headlight Aim Control
If "No DTC recognized" appears, press -> button to return to "Select function XX" prompt.
No DTC recognized ->
Indicated on display
Rapid data transfer HELP
Select function XX
If something else is displayed:
- Press buttons -0- and -6- to select "End Output" function 06.
- Switch ignition off and disconnect scan tool from DLC.