Channel 43 (Max. Mileage)

Maximum Mileage
This function is used to specify a fixed maximum mileage performance in the instrument cluster for the SRI.

Initiate Adaption Function. Adaptation Function Initiation






Indicated on display
- Press -1- and -0- and confirm by pressing the -Q- button.

Indicated on display
Rapid data transfer Q
10 - Adaptation
- Press -Q- button to confirm input.

Indicated on display:
Adaptation
Input channel number XX
- Press buttons 4- and -3-.
- Press -Q- button to confirm input.

Indicated on display:
Channel 43 Adaptation 8 ->
max-value oil in 1000 Miles <- 1 3 ->
The maximum mileage performance up to a service will be displayed (here for example 8 represents 8000 miles).

Note:
- The adaptation value entered for the relevant engine variant must match the value in the table. Please refer to Adaptation values. Table For Channels and Adaption Values
- Input of current specified value is only possible in units of 1000, therefore indication in display also changes in 1000 units.
- In countries where speedometers are calibrated in miles, adaptation can be performed in miles.
- Values can only be input directly using the scan tool keypad.
- If an incorrect value is input, the 'Adaptation" function is terminated and must be re-initiated.

- Press -> button.

Indicated on display:
Channel 43 Adaptation 8
Input adaptation value XXXXX
- Input specified value using keypad, filling initial positions with "0".
Input value: 8000 Miles i.e. 5000 Miles (1.8L Turbo)
Keypad input: 00008

Indicated on display:
Channel 43 Adaptation 8 Q
Input adaptation value 00008
- Press -Q- button to confirm input.

Indicated on display:
Channel 43 Adaptation 8 Q
max-value oil in 1000 Miles <- 1 3 ->
- Press -Q- button to confirm input.

Indicated on display:
Channel 43 Adaptation 8 Q
Store changed value?
- Press -Q- button to confirm input.

Indicated on display:
Channel 43 Adaptation 8 ->
Changed value stored
- End adaptation of the minimum mileage by pressing the -> button.