Channel 44 (Max Time Interval Until Service)

Maximum Time Interval
This function is used to set a fixed maximum time in days in the instrument cluster for the SRI.

Initiate Adaption Function. Adaptation Function Initiation






Indicated on display
- Press -1- and -0- and confirm by pressing the -Q- button.

Indicated on display
Rapid data transfer Q
10 - Adaptation
- Press -Q- button to confirm input.

Indicated on display:
Adaptation
Input channel number XX
- Press buttons 4- and -4-.
- Press -Q- button to confirm input.

Indicated on display:
Channel 44 Adaptation 365 ->
max-value Insp. in 1 days <- 1 3 ->
The display indicates the maximum time interval in days to the next service (for example, 365 represents 365 days).

Note:
- The adaptation value entered for the relevant engine variant must match the value in the table. Please refer to Adaptation values. Table For Channels and Adaption Values
- Input of current specified value is only possible in units of one day, therefore indication in display also changes in one day units.
- Values can only be input directly using the scan tool keypad.
- If an incorrect value is input, the 'Adaptation" function is terminated and must be re-initiated.

- Press -> button.

Indicated on display:
Channel 44 Adaptation 365
Input adaptation value XXXXX
- Input specified value using keypad, filling initial positions with "0".
Input value: for example 365 days.
Keypad input: 00365

Indicated on display:
Channel 44 Adaptation 365 Q
Input adaptation value 00365
- Press -Q- button to confirm input.

Indicated on display:
Channel 44 Adaptation 365 Q
max-value Insp. in 1 days <- 1 3 ->
- Press -Q- button to confirm input.

Indicated on display:
Channel 44 Adaptation 365 Q
Store changed value?
- Press -Q- button to confirm input.

Indicated on display:
Channel 44 Adaptation 365 ->
Changed value stored
- End adaptation of the minimum mileage by pressing the -> button.