Auxiliary Relay Panel/Auxiliary Fuse Panel, Replacing

CAUTION!
Disconnect the battery Ground (GND) strap before working on the electrical system.

NOTES:
- Before disconnecting the battery, determine the correct coding for the anti-theft radio.
- After reconnecting the battery, check and activate the vehicle's electrical equipment (radio, clock, comfort and convenience features, etc.) as outlined in the Owner's Manual.

Location: in footwell, bottom left.





- Remove nut -A- (2 Nm or 18 in. lb) and self-tapping screw -B-.
- Remove relay and control module, unclip relay carrier and, if necessary, unclip auxiliary relay panel.
- Pull out auxiliary relay panel from retainers and remove from below.
- Install in reverse order of removal.