Navigation Module: Service and Repair

Control module for navigation with CD mechanism -J401-, removing and installing (sedan)







The control module for navigation with CD-mechanism -J401- is located in the left rear of the luggage compartment.
- Open the left storage bin of luggage compartment.
- Remove paneling on left side of luggage compartment.
- Remove the mounting screws -1- and -2- from the carrier. Then loosen screw -3-, to enable removal of carrier -4-.
- Disconnect harness connectors on back side of control module then completely remove carrier -4-.
- When disconnecting harness connectors, unscrew both mounting screws (arrows) on left and right of control module for navigation with CD-mechanism -J401-, and remove it from the carrier -4-.

Installing
- Install in reverse order of removal.