Left Rear Level Control System Sensor -G76-

Left Rear Level Control System Sensor -G76-, Removing And Installing

Front wheel drive

Removing

The sensor is mounted to the center of the rear axle.
- Disconnect harness connector.







- Sensor is removed from locking plate -2- and rod assembly -3- by removing nuts -4- and socket-head screws -4- (2x) on sensor -1-.
- Rod -3- is removed by removing nut on rear axle.

Installing

- Install in reverse order of removal.

All wheel drive

Removing

The sensor is located at the left-rear suspension.
- Disconnect harness connector.







- Sensor is removed from locking plate -3- and rod assembly -4- by removing nuts -1- and two socket-head screws on sensor -2-.
- Rod -4- is removed by removing nut -5- on control arm.

Installing

- Install in reverse order of removal.