Clutch Switch: Service and Repair

Clutch Pedal Position (CPP) Switch -F194-, Removing and Installing






Note:

- The Clutch Pedal Position Switch (CCP) -F194- allows the engine to be started only with the clutch pedal depressed.

1. Mounting bracket
- Before removing, remove steering column from steering gear.
2. Cable bracket
3. Locking clip
4. Pin and locking plate
Latched in clutch pedal
5. Clutch pedal
- Removing and installing, Clutch Pedal and Over-Center Spring, Removing and Installing
6. Clip
7. Bracket for harness connector
8. Clutch Pedal Position (CPP) switch -F194
- Adjusting, Adjustments
9. Clip
10. Screw and washer assembly
- 8 Nm (71 inch lbs.)
11. Mounting plate