Tiptronic Shift Mechanism, Assembly Overview

5 Speed A/T 01V

Tiptronic shift mechanism, assembly overview
Assembly sequence, Refer to Tiptronic Shift Mechanism, Disassembling and Assembling (Sequence)
Lubricate bearing areas and slide surfaces with polycarbamide grease Part No. G 052 142 A2.





1. Selector lever handle
2. Sleeve
3. Cover
4. Bearing bushing
5. Locking clip (thin, with tensioning spring)
6. Selector lever
7. Compression spring
8. Pull-lever
9. Locking clip (thick, with compression spring)
10. Stop buffer
11. Catch
12. Cable lever
13. Catch spring with roller
14. Catch spring with roller
15. Frame
16. Nut, 10 Nm
17. Shift mechanism housing
18. Pivot pin
19. Locking latch
20. Shift Lock
21. Pivot pin
22. Cover
23. Nut, 10 Nm
24. Locking clamp
25. Locking plate
26. Selector lever cable
27. Hex bolt, 23 Nm
28. Pivot
29. Cable ties
30. Ignition/Starter - Switch
31. Locking cable
32. Catch lever
33. Retaining spring
34. Storing





Fig. 1 Securing spring for locking cable, removing and installing

Removing
- To remove locking cable, slightly lift spring at top (arrow B).R
- Unhook spring (arrow A) at retaining clip (arrow C) and remove toward top.

Installing
- Insert spring (arrow B) from top and hook in at retaining clip (arrow C).
- Align spring so that it is seated evenly in groove (arrow A).
- To install locking cable, slightly lift spring at top (arrow B).