Code Control Module (Function 07)

Code Control Module (scan tool function 07)

This function is used to code the radio for the following:
- Radio configuration
- Sound system
- Number of passive loudspeakers
- Country identification


NOTE:
- The coding procedure is used to set the various radio configuration options.
- The coding table only gives the combinations that are available for the Audi A4.
- The term "antenna with remote power supply" refers to active antennas (e.g. rear window antennas) which are powered via the HF cable.
- The coding must always correspond to the equipment installed in the vehicle.


Coding procedure


Indicated on display


Rapid data transfer HELP
Select function XX


- Press buttons -0- and -7- to select "Code Control Module" function 07.


Indicated on display


Rapid data transfer Q
07 - Code Control Module


- Press -Q- button to confirm input.


Indicated on display


Code Control Module Q
Input code number XXXXX 06812


- Input code number per coding table.

Coding: 00017 (example)
- Country identification: 0 = standard
- Sound coordination: 0 = standard
- Number of passive loudspeakers: 0 = no passive loudspeakers (BOSE sound system)
- Sound system: 1 = BOSE sound system
- Radio configuration: 7 = radio system with CD changer unit and secondary display
- Press -Q- button to confirm input.

Indicated on display (the control module identification and the coding that was input)


4B0035186A Radio D01 ->
Coding 00017 WSC 06812


- Press -> button to end coding.

Indicated on display


Rapid data transfer HELP
Select function XX


- Press buttons -0- and -6- to select "End Output" function 06.

Indicated on display


Rapid data transfer Q
06 - End Output


- Press -Q- button to confirm input.

Radio coding table