Evaporative Emissions System: Locations

EVAP System, Servicing

EVAP system components







1 - Cap nut
- 10 Nm
2 - Cover
- For EVAP canister
3 - Stud
- 15 Nm
4 - Sealing piece
5 - Bleed line
- To EVAP canister purge regulator valve -N80
6 - Bleed line
- From gravity valve
7 - Vacuum hose
- LDP / throttle actuator control module
Connection in engine compartment
- 4 cylinder engine See Fig. 1
- 6 cylinder engine See Fig. 2
8 - Cable tie
- To mounting of vacuum line on LDP bracket
9 - Leak detection Pump (LDP) -V144
- Location: in left rear wheel house behind wheel well
10 - 3-pin harness connector
- Black
11 - Connecting hose
- LDP / EVAP canister
- Pressure side
- To remove at LDP, press unlocking tab on connector
12 - 10 Nm
13 - Air filter
- For LDP
14 - Sealing piece
15 - Cable tie
- For mounting connecting hose on wheel house
16 - EVAP canister
- Location: lower front in spare wheel well







Fig. 1 Connections to LDP in engine compartment
Vehicles with 1.8 ltr. turbo engine
The vacuum line for the LDP -V144 is connected to the Throttle actuator control module line with a T-piece -arrow-.







Fig. 2 Connections to LDP in engine compartment
Vehicles with 2.8 ltr. engine
The vacuum line from the LDP -V144 is connected to the EVAP canister purge regulator valve with a T-piece -arrow-.
1 - to EVAP canister
2 - to LDP -V144