With Manufacturer Scan Tool

Check DTC Memory (function 02)

NOTE: The displayed DTC information is updated only when initiating OBD or with "Erase DTC Memory" function 05.

- Initiate output Diagnostic Test Mode of instrument cluster, Initiating


Display on VAS5051:







- In selection -1-, click on the diagnostic function "02 - Check DTC Memory".


Display on VAS5051:







1 - DTC memory content:
- 0 malfunctions recognized
or
- X malfunctions recognized

2 - Diagnostic Trouble Code (DTC)
- DTC
- malfunction location
- malfunction type

If malfunctions were recognized:
- Print out Screen content or On Board Diagnostic (OBD) protocol:
- Click on <- button

Display on VAS5051:







- Repair malfunction(s) according to DTC table, Instrument Cluster/Carrier
- In selection, click on diagnostic function "02 - Check DTC Memory" again and Erase DTC Memory With Manufacturer Scan Tool
- In selection, click on diagnostic function "06 - End Output" End Output (Function 06)

If no malfunction was recognized:
- In selection -1-, click on diagnostic function "06 - End Output" End Output (Function 06)