Final Drive to Axle Beam

Rear Final Drive on Axle Beam, Removing and Installing






1. Axle beam
- Aligning axle beam to vehicle; Refer to Axle Beam, Aligning to Vehicle
2. Bonded rubber bushing
- replace bonded rubber bushings.
3. Hex bolt M10 x 75
4. Socket head bolt M10 x 45, 55 Nm
5. Nut, 40 Nm
6. Washer
7. Socket head bolt M10 x 25, 40 Nm
8. Transmission - support
- Replace bonded rubber bushings
9. Rear final drive
- Servicing; Refer to Transmission and Drivetrain.
10. Cross member
- Replace bonded rubber bushings.