Locks - Remote/Central Locking Function Activation
57 Activating remote/central locking functions57 10 27
2003181/4
June 23, 2010
Supersedes Technical Service Bulletin Group 57 number 08-18 dated December 9, 2008 for reasons listed below.
Affected Vehicles
Condition
Customer requests that specific remote/central locking functions be activated.
Technical Background
Not applicable.
Production Solution
Not applicable.
Service
Review optional control module coding below with customer to confirm the desired function changes. Input codings into central locking control module using function 07 Code Control Module.
Optional Control Module Coding
In addition to basic coding, it is possible customers may request for the vehicle to lock automatically upon reaching a speed of about 15 km/h (10 mph) and unlock when key is removed from ignition.
Example of carrying out Code Control Module function 07
1. Connect VAG 1551/1552 to Data Link Connector (DLC) and advance to Rapid data transfer.
2. Press buttons 3 and 5 to insert Central Locking address word 35.
3. Select Q >> -> >> 07 >> Q.
4. Enter control module coding (Standard Coding: 15885; Optional Coding: 15917).
5. Press Q >> -> >> 06 >> Q to confirm input.
6. Disconnect VAG 1551/1552 from Data Link Connector (DLC).
Warranty
Additional Information
All parts and service references provided in this TSB are subject to change and/or removal. Always check with your Parts Department and service manuals for the latest information.