Bushings For Track Control Link, Replacing

Bushings For Track Control Link, Replacing

Special Tools and Equipment
- 3301 installation tool
- 3301/4 installation tool
- 3346 installation tool





- 3346/ 2 installation tool
- 3346/ 3 installation tool
- 3350/ 1 installation tool

Note: When clamping aluminum control arms, use protective pads.





Fig. 1 Pull out inside bushings





Fig. 2 Installed position of bushing
- Installation marks on track control link and bushing edge run parallel to one another.





Fig. 3 Pull in inside bushings
- Insert bushing (A) in thrust piece (3346/1) to a depth of 3.2 mm.
- Pull in bushing until it stops.





Fig. 4 Pull out outside bushing





Fig. 5 Pull in outside bushing
- Insert bushing -A- in 3346/1 thrust piece to a depth of 8 mm.
- Pull in bushing until it stops.