Bleeding

Clutch system, bleeding
Special tools and equipment





^ VAG1869 brake filler/bleeder unit

Notes:
^ First open bleeder valve, before switching on brake filler/bleeder unit.
^ For this work step, make sure no brake fluid leaks onto transmission.
^ Bleed clutch system after working on hydraulic clutch mechanism.
^ Top off brake fluid reservoir to "MAX" mark before bleeding clutch system.

- Pull clutch pedal back to rest position.
- Connect VAG1238B or VAG1869 brake filler/bleeder unit but do not switch on yet.





- Connect bleeder hose -A- to clutch slave cylinder (arrow) and open bleeder valve.
- Connect bleeder hose to pressure hose of collector bottle.
- Now switch on brake filler/bleeder unit and bleed approx. 100 cm3 of brake fluid.
Work pressure: 2.5 bar positive pressure

Note: While bleeding, make sure bleeder hose remains correctly routed.

- Close bleeder valve and tighten to 4.5 Nm.
- Depress clutch pedal several times after completion of bleeding process.
- Bleed system again if necessary.