Terminal Assignment of Multi-Pin Harness Connectors

Terminal Assignment Of Multi-pin Harness Connectors I, II, III, IV At Rear Of Control Module For Navigation With CD-mechanism -J401-







20-pin multi-pin connector I
1 - CAN-high telematic
2 - CAN-high display
3 - CAN screen telematic
4 - CAN-low telematic
5 - CAN-low display
6 - CAN screen display
7 - Button branch 2
8 - Output A
9 - Switch
10 - Button branch 3
11 - Output B
12 - Ground (GND)
13 - NF +
14 - NF mute navi
15 - NF -
16 - Telephone NF (+)
17 - Tel-active / mute FAW
18 - Tel-NF-screen
19 - Telephone NF (-)
20 - Not assigned

Brown 8-pin multi-pin connector II
1 - Not assigned
2 - Not assigned
3 - Not assigned
4 - Not assigned
5 - Not assigned
6 - Not assigned
7 - Not assigned
8 - Not assigned

Black 8-pin multi-pin connector III
1 - Gala (RPM signal)
2 - Reverse light switch
3 - K-diagnostic
4 - Terminal 15
5 - Not assigned
6 - Not assigned
7 - Terminal 30
8 - Terminal 31

Red 10-pin multi-pin connector IV
1 - Not assigned
2 - Not assigned
3 - Not assigned
4 - Not assigned
5 - Not assigned
6 - Not assigned
7 - Not assigned
8 - Not assigned
9 - Not assigned
10 - Not assigned