Guide Link Bushings, Replacing

Guide Link Bushings, Replacing

Special Tools and Equipment

- 3301 installation tool
- 3346/ 2 installation tool





- 3346/ 3 installation tool
- 3347 installation tool
- 3347/ 1 installation tool
- 3347/2 installation tool

Remove hydro-bushing at control arm





Note: When clamping aluminum control arms, use protective pads.

Installation position of anti-vibration mount





The arrows -1- and groove -2- on the anti-vibration mount point in the direction of the joint bolt.
The allowable deviation is ± 5°

Pull in anti-vibration mount





- Insert anti-vibration mount (A) into special tool (3347/2).
- Clamp together with sleeve (334711), spindle (3346/2) and hex nut.
- Pull in anti-vibration mount (A) until it stops.