Front Bumper, Assembly Overview

Front Bumper, Assembly Overview







1 - Hex bolt
- 21 Nm
2 - Impact absorber
- 2 pieces
Removing:
- Remove bumper.
- Remove pressure switch
- Remove hex bolt - 1 - and pull out impact absorber.
3 - Hex bolt
- 10 Nm







4 - Hex nut
5 - Bracket
- Different versions on left and right sides
- Adjusting Fig. 1
6 - Bumper carrier
Removing:
- remove bumper
- Unclip expanding clip -item 5- and remove bumper carrier from cover and spoiler.
7 - Nut
8 - Expanding clip
- 18 pieces
9 - Hex bolt
- 65 Nm
10 - Trim







11 - Bumper cover
12 - Front spoiler
- Can be replaced individually
13 - Air guide grill, external
14 - Air guide grill, center
15 - License plate holder

Fig. 1 Adjusting Height At Bracket







- Loosen bolt - 1 - of bracket - 2 - several rotations.
- Adjust height of bumper to fender by shifting bracket forward or rearward.