Rear Door: Locations

Door Trim, Rear







1 - Door trim
2 - Door security light
- Clipped in door trim
3 - Retaining clip
- For door trim
4 - Expanding clip
- 3 parts
- To remove press pin approx. 4 mm inward
- To install, press pin from front until it locks in
- Depending on design status Phillips-head screws can be used instead of expanding clips
5 - Phillips-head screw
- 1.7 Nm (15 in. lb)
6 - Deadener
- Fasten to adhesive area (arrows) with dual sided tape
7 - Door locking button
8 - Phillips-head screw
- 1.7 Nm (15 in. lb)
9 - Trim
- Inserted on to door trim
- Pry off carefully
10 - Phillips-screw
- 1.8 Nm (16 in. lb)
11 - Door-inner activation
12 - Handle well-upper part
- With ashtray and switch mounting
- To remove handle well remove lower part and unscrew screws -13-
- Shown in one part version
13 - Phillips-head screw
- 1.8 Nm (16 in. lb)
- 2 parts
14 - Door well, lower part
15 - Lower-switch mounting
16 - Phillips-head screw
17 - Hex bolt
- 4.6 Nm (40 in. lb)
18 - Entry light
- Clipped in door trim