Operation CHARM: Car repair manuals for everyone.
Home >> Audi >> 2001 >> A8 Quattro Sedan (4D2) V8-4.2L (AUX) >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Service and Repair >> Engine, Disassembling and Assembling >> Vibration Damper, Removing and Installing

Vibration Damper, Removing and Installing


Vibration dampener, removing and installing
- Ribbed belt, removing and installing. Service and Repair

Note: It is not necessary to loosen the center bolt to remove the vibration dampener.

- Remove vibration dampener.





- Align notch (arrow) in vibration dampener with locating lug on toothed belt sprocket.
- Install vibration dampener.
- Tightening torque: 20 Nm (15 ft. lbs.)

- Ribbed belt, installing. Service and Repair
pro multis · About Operation CHARM