Repair Kit For Headlight Housing, Installing

Repair Kit For Headlight Housing, Installing


NOTE: Headlight mounting tabs that have broken off can be replaced by installing the repair kit. Complete replacement of the headlight is therefore not necessary.







- Remove remains of broken mounting tab -1- at the edge marked by the arrow.
- Slide sheet metal nut -3- into mounting tab -2- from repair kit.
- Secure mounting tab -2- using bolt -4- and shim washer at headlight housing from rear.

Right arrow indicates separation edge on an intact mounting tab -5-.

NOTE: Mounting tabs of lower headlight mounting points can also be replaced individually.