Evaporative Emissions System: Locations

1 - Throttle valve control module - J338
2 - Evaporative Emission (EVAP) canister purge regulator valve -N80
- Location: In engine compartment
- Checking:
3 - Vent line
- From EVAP canister to EVAP canister purge regulator valve -N80
- Installation position: right side under floor pan
4 - Vent line
- To gravity valve on expansion tank
5 - EVAP canister
- Location: Inside bottom of spare wheel well
6 - Connection hose
- LDP/EVAP canister
- Pressure side
7 - Leak Detection Pump (LDP) V144
- Vacuum operated
- Location: In wheel housing left rear, beneath wheel housing liner
8 - Air filter
- For LDP pump
- Location: Arrow on filter housing points to LDP 7
9 - Vacuum line/hose
- LDP/intake manifold, front