Adaptation (Function 10)

Adaptation

Using the adaptation function, the following changes can be made and saved.

- Volume of warning chime
- Pitch (frequency) of warning chime

Initiating "Adaptation" function 10

Indicated on display


Rapid data transfer HELP
Select function XX


- Press buttons -1- and -0- to select "Adaptation" function 10.

Indicated on display:


Rapid data transfer Q
10 Adaptation


- Press -Q- button to confirm input.

Indicated on display:


Adaptation
Insert channel number XX


- Input channel number, e.g. 01 (from adaptation table) and press -Q- button to confirm input.

Indicated on display:


Channel 1 Adaptation 6 ->
Steering wheel 0 6 WSC 06812 <-1 3->


- Either adjust adaptation value downward using button -1-, upward using button -3- or press -> button.
- Press -> button.

Indicated on display:


Channel 1 Adaptation 6
Input adaptation value XXXXX


- Now enter the adaptation value by hand (e.g. 00005).

Indicated on display:


Channel 1 Adaptation 6 Q
Input adaptation value 00005


- Press -Q- button to confirm input.

Indicated on display:


Channel 1 Adaptation 5 ->
Steering wheel 0 5 WSC 06812 <-1 3->


- Press -Q- button to confirm input.

Indicated on display:


Channel 1 Adaptation 5 Q
Store changed value?


- Press -0- button to confirm input.

Indicated on display:


Channel 1 Adaptations ->
Changed value is stored


- Conclude adaptation of the rear warning buzzer volume by pressing the -> button.

Indicated on display


Rapid data transfer HELP
Select function XX


Perform procedure for adaptation channels 02, 03, and 04 in the same manner.

Adaptation Table: