Rear Bumper, Installing

Rear Bumper, Installing







1 - Bracket
2 - Guide
- Removing and installing Fig. 1
3 - Bumper cover
- Slide bumper cover into guide - 2 - and bracket - 1 - as shown in illustration
- Bumper cover must be guided into both guide - 2 - and bracket - 1 -
- Tighten machine screw - 5 - to 65 Nm
4 - Rear spoiler
- Can be replaced individually
5 - Machine screw
- 65 Nm

Fig. 1 Guide, Removing And Installing







- Remove hex bolt - 1 - and take off guide - 2 -.
- When installing, tighten hex bolts to 10 Nm.