Child Seat: Testing and Inspection

Child Seat Function, Additional Child Seats, Checking

Passenger seat belt 07.96 >, rear seat belts > 07.95

For function check, belt components must be completely installed, including the B-pillar.

Switch on retaining function:
- Pull belt band completely up to stop.

Function:
- The belt must roll up with rolling noise.
- If roll up process is stopped, then belt can no longer be pulled out.

Shut-off:
- Return of belt up to approx. 100 mm
- At a remainder of 100 mm retaining function must shut off. Belt is in normal function again.