Front Bumper Assembly Overview

Front Bumper, Assembly Overview
1. Hex bolt
21 Nm
2. Impact absorber
- 2 pieces
Removing:
- Remove bumper. Service and Repair
- Remove pressure switch
- Remove hex bolt -1- and pull out impact absorber.
Checking
3. Hex bolt
10 Nm
4. Hex nut
5. Bracket
Different versions on left and right sides
Adjusting
6. Bumper carrier
Removing:
- remove bumper
- Unclip expanding clip -item 5 - and remove bumper carrier from cover and spoiler.
7. Nut
8. Expanding clip
18 pieces
Unclipping page
9. Hex bolt
65 Nm
10. Trim
Removing and installing.
11. Bumper cover
12. Front spoiler
Can be replaced individually
Removing and installing
13. Air guide grill, external
14. Air guide grill, center
15. License plate holder

Note: For additional information, please refer to Service and Repair Procedures for the Front Bumper. Service and Repair