Camshaft Bearing Cap Tightening Sequence & Torque

Camshaft Bearing Cap, Tightening Torque and Sequence; Refer to Camshaft, Engine, Service and Repair Service and Repair

Bearing cap to Cylinder head 10 Nm + 90 ° (7 ft.lb + 90 °)
Camshaft Adjuster To Cylinder Head 10 + 90° (7 + 90°)
Camshaft Position (CMP) Sensor Rotor To Camshaft 23 Nm (17 ft. lbs.)
Camshaft Position (CMP) Sensor Housing To Cylinder Head 10 Nm (7 ft. lbs.)
New 0.05 - 0.15 mm (0.0020 - 0.0059 inch)
Wear Limit 0.20 mm (0.0079 inch)