Channel 43 (Max. Mileage)

Adaptation (function 10)
individual functions are called up by entering the appropriate adaptation channel numbers (see adaptation table). [1][2]Service and Repair

Initiating "Adaptation" function 10
- Initiate output Diagnostic Test Mode of instrument cluster. [1][2]Adaptation Function Initiation

Adaptation Channel 43 - Maximum Mileage Performance
This function is used to specify a fixed maximum mileage performance in the instrument cluster For the SRI.






Display on VAS5051:
- Select function "43" in button field -2- for "Adaptation channel 43" and press Q button to confirm input.






Display on VAS5051:
1 - Channel 43 read and test
2 - Maximum value Oil in 1000 mile increments.
3 - Keypad - only direct input via the keypad is possible
4 - The sliding bar is positioned on the current adaptation value, e.g. 8 The maximum mileage performance up to a service will be displayed (here For example 10 represents 10000 miles).

Note:
- Input of current specified value is only possible in units of 1000 miles, therefore indication in display also changes in 1000 mile units.
- Change adaptation value via direct input using keypad, not with the sliding bar.
- Enter 5-digit adaptation value. Insert zeros in front.
Example:
Specification: 10000 miles
Keypad input: 00010

NOTE: The "Save" button does not appear if an incorrect value was entered!






Display on VAS5051 after performed adaptation:
1 - Channel 43 Value 10 stored
- End function "10 - Adaptation" by pressing <- button.

NOTE: After changing an adaptation value or ending an adaptation channel, "10 - Adaptation" function must be selected again before selecting another adaptation channel!