With Manufacturer Scan Tool

Erase DTC Memory (function 05) and End Output (function 06)
Preconditions:
^ DTC memory has been checked

1. Erase DTC Memory
^ Press the (arrow) button





Display: (Clearance for function selection)
^ Press the -0- and -5- buttons; 05 causes entry of the "Erase DTC Memory" function.





Display:
^ Confirm entry using the Q button





Display:
^ Press the (arrow) button





Display: (Clearance for function selection)

Notes:





^ If this display appears, the test sequence is incorrect.
^ Adhere precisely to the test sequence: First check the (DTC) memory, then clear it.

2. End Output





Display:
^ Press the -0- and -6- buttons; this ends output.





Display:
^ Confirm entry using Q button





Display:
^ Switch ignition off
^ Disconnect link to VAG1551 scan tool