Rear

Spacing discs
Spacing discs are installed between the carrier and the chassis at the rear axle on Allroad vehicles.

At front (direction of travel) with index "C" and a height of 23.5 mm -1-.
At rear (direction of travel) with index "B" and a height of 25 mm -2-.
These are eccentric.





- Mark installed position of spacing discs when removing.
When installing spacer disc -2-, make sure the rubber bead of the subframe mount is covered. The longer projecting end points opposite the direction of travel.

Note different bolt versions!

Arrows - 3 - point opposite the direction of travel.
Tightening torque for combination bolt -4-: 115 Nm plus additional 90° turn.
Always use a new bolt.